DigiRig

By rbosaz , 31 December, 2023

You'll need the following:

  • DigiRig
  • USB C to USB A
  • USB B to USB A
  • Audio Cable (black, not green) to DIN Connector

Then plug together as follows:

  • Plug USB C into DigiRig and USB A into your computer.
  • Plug audio cable into audio port of DigiRig and DIM plug into radio (orientation is crucial).
  • Plug USB B into radio and USB A into computer.

 

The following settings were taken from this(link is external) YouTube video.

WSJT-X Settings

  • Determine serial port and audio out/in inputs. Don't operate at full power (HF SSB Power). Match WSJT-X baud rate to Radio's cat rate (05-06).
  • Data bits = Default
  • Stop bits = Default
  • Handshake = Default
  • Force Control Lines = Empty
  • Digirig's PTT Method is RTS.
  • Determine Digirig's PTT port.
  • Mode = USB
  • Split Operation = None

Radio Settings

  • Turn off AGC
  • Adjust RF Gain so WSJT-X left receive bar is green.
  • Set MTR to ALC
  • Adjust WSJT-X Pwr so ALC is barley moving